Useful information

USAGE and MAINTENANCE INFORMATION :

The product should be stored in their original packaging in a dry environment with temperature of 20 degrees until the installation isn't started.

The unevenness of the exceeding 1 mm screed must be even with leveling compound. If the moisture content does not exceed the 2%, then it should be starting with the preparation and dust-control of the surface. Under these conditions it can be start with the laying of the parquet. After gluing it must be sanding and surface treating the parquet.

The parquet can be laid over in various forms: English bond, running pattern, chess board, fishbone, double-fishbone pattern. The parquet must be glue on the entire surface. The adhesive should be applied uniformly in thin layer on the entire surface according to deposition rate.  The parquet has accurate dimensions, joining into one another does not require any special power. If we use a hammer, tapping block incorporating recommended.

Important! It should be left 10-15 mm gap along the walls due to the natural swelling of the wood. At the thresholds or at the other joint of the other hard surfaces on the same level must be provided expansion joint inserting the casing rail. Must be check the humidity of the place the ideal relative humidity is 55-65 %

In case of under floor heating ask an expert for the wood species and material thickness.

Please note, that the color of the wood will be darker exposure to natural light.

Guarantee: Your bought product complies with the Hungarian standards both in quality and in other parameters. Please check each item before installing! Any complaints could be indicating before laying the floor. We do not take guarantee on the already installed surface (glued, nailed, sanded, surface-treated.)

The top layer of product is made of solid wood, it should be not create an object of complaint the differences in structure and tone which are characterized the wood species. We can accept complaints from the errors of production and errors of the classification.

USAGE and MAINTENANCE INFORMATION:

The product should be stored in its original packaging in dry environment with temperature of 20 degrees until installation is started.

The unevenness of the screed exceeding 1 mm must be made even with levelling compound. If moisture content does not exceed 2%, the preparation and dust-control of the surface can be started. Under these conditions laying of the parquet can be started. After gluing the parquet, it must be sanded and its surface treated.

The parquet can be laid down in various forms depending on its dimensions: English bond, running pattern, chess board, herringbone, double-herringbone pattern. The parquet must be glued on the entire surface. Adhesive must be applied uniformly in thin layer on the entire surface according to deposition rate.  The parquet has accurate dimensions, joining into one another does not require any special power. In case a hammer is used, the incorporation of a tapping block is recommended.

Important A 10-15 mm gap should be left along the walls due to the natural swelling of wood. At the thresholds or at the other joints of the other hard surfaces on the same level expansion joint must be provided by inserting a casing rail. The humidity of the place must be checked, the ideal relative humidity is 55-65 %

In case of under floor heating ask for the advice of an expert about wood species and material thickness.

Please note, that the colour of the wood will be darker if it is exposed to natural light.

Warranty: The product you bought complies with the Hungarian standards both in quality and in other parameters. Please check each item before installing. Any complaint must be indicated before laying down the floor. We do not offer any warranty on already installed surface (glued, nailed, sanded and surface-treated.)

The top layer of product is made of solid wood, the differences in structure and tone characterizing given wood species may not create an object of complaint. We can accept complaints from the errors of production and errors of the classification exclusively.

CLEANING GUIDE:

Dust-control of the floor can be done with a vacuum cleaner or with a dry duster.Wrung wet cloth is well suited in case of mild dirt. Please, ignore mopping and cleaning machines. If any chemicals or water gets on the floor in large quantities make sure you remove it as soon as possible. Wood and laminate floors are very sensitive therefore their cleaning maybe done exclusively by a wrung damp cloth. As the parquet is coated, it is practical to glue felt pads with right size on the foot of tables and chairs to protect the floor from scratches (for this purpose you can sized felt pads are already available in trade). You also need to pay attention that the rollers of chairs and furniture should have the type of "H". Warning: Even though the parquet is made of hard wood, stilettos shoes may leave a mark on it (because the parquet receives very high dynamic load on small surface). The access of moisture and sand is reducible with mud carpets at the outdoor entrances.

HEALTH HAZARDS:

The product is not toxic and may not cause harm to humans or to animals.

 

SURFACE TREATMENT:

 

The reaction of the surface of our product with food and other chemicals is continuously tested to ensure the quality of their surface treatment.

 

Terra da Bosco